1. Evaluate job-site and subfloor conditions. Check for any moisture buildup, and high and low points in the floor.
2. Read the product instruction package in the cartons.
3. A completed floor is only as good as the subfloor preparation, and the installer.
4. All solid hardwood expands across the grain - allow expansion space.
5. Do not use solid products below grade or in damp, humid situations.
6. Consult your dealer for proper subfloor thickness.
7. Nail all solid strip flooring at proper intervals. See installation in the box.
8. Wood is a natural product, subject to infinite variations. Flooring is manufactured on high-speed equipment, should a piece be doubtful do not install it. Cut it for the wall line, put it in a closet, or do not install it. Ask yourself "how is this going to look in the middle of the floor?"
9. When butting flooring up to sliding glass doors, make sure that the threshold is properly sealed with recommended silicone.
10. If in doubt, call a professional!

Moldings used with Hardwood Floors

Wood floors require an expansion space at the wall. Molding is used to cover the expansion area, to hide cut ends, to create height differences, and to accent the floor. Profiles are many and vary through the industry.

Back To Top